KRMA RDA Legacy Archive by Mission XV
A short run pulled from the Mission XV archive. The KRMA is a 22mm single-coil RDA with dual side airflow, a bottom-fed hybrid squonk deck, and clean build ergonomics.
In the box:
- KRMA RDA base
- Stainless steel top cap + matching 6mm bore 510 tip
- Black Delrin top cap + matching 6mm bore 510 tip
- Spare o-rings and hardware
Hybrid squonk 510 connector. The 510 pin ships in squonk (BF) configuration. To run it on a non-squonking setup, use the small grub screw underneath the deck to plug the center pin. No disassembly needed. Converts to standard dripping in seconds.
Specs:
- Diameter: 22mm
- Height: 22mm
- Deck: dual-post, single-coil, single terminal per post (4mm x 1.5mm post holes, flathead top-secured)
- Juice well: 5mm, with lead trap
- Airflow: dual side, 4.5mm x 1.5mm ports, step-down design for leak resistance
- Drip tip: 6mm bore 510 (one per cap)
- 510 pin: hybrid squonk / BF, convertible via included grub screw
- Material: stainless steel
A short run pulled from the Mission XV archive. The KRMA is a 22mm single-coil RDA with dual side airflow, a bottom-fed hybrid squonk deck, and clean build ergonomics.
In the box:
- KRMA RDA base
- Stainless steel top cap + matching 6mm bore 510 tip
- Black Delrin top cap + matching 6mm bore 510 tip
- Spare o-rings and hardware
Hybrid squonk 510 connector. The 510 pin ships in squonk (BF) configuration. To run it on a non-squonking setup, use the small grub screw underneath the deck to plug the center pin. No disassembly needed. Converts to standard dripping in seconds.
Specs:
- Diameter: 22mm
- Height: 22mm
- Deck: dual-post, single-coil, single terminal per post (4mm x 1.5mm post holes, flathead top-secured)
- Juice well: 5mm, with lead trap
- Airflow: dual side, 4.5mm x 1.5mm ports, step-down design for leak resistance
- Drip tip: 6mm bore 510 (one per cap)
- 510 pin: hybrid squonk / BF, convertible via included grub screw
- Material: stainless steel
| Бренд | MISSION XV |
